Setting a pergola on a concrete slab
Let’s say you have gone through all the steps for preparing your site for your pergola as covered here. Your yard may not big as the one picture above, but in the majority of examples people are looking for techniques and instructions on how to secure a pergola to a concrete slab since most patios are laid out with concrete, particularly the ones attached directly off the back of a house. So let’s cover those basic steps.
It really does take two people so please don’t try to do this on your own. Everything needs to be straight and level and true to ensure that your pergola is as sturdy safe and durable as possible. Start out by measuring to find the center of the concrete pad. You want to make sure you center the pergola on it properly.
Then measure from the center out 1/2 of the width projection of the pergola. Repeat on the other side and then use the same method for the length projection dimensions. Mark all the spots. Using a chalk line, connect the marked spots and draw out a perimeter. If building a square pergola, remember to check the diagonal measurements. They should be the same from corner to corner. Adjust the corner marks as needed.
And there you have your post locations! Bolt in your concrete base brackets and you are ready to put up your posts and get to the heavy lifting.For more information on the next steps to take to build your own pergola, please click here and check out our step by step guide. We’ve gathered everything we’ve learned from thousands of hours of personal experience, consultations with contractors and research in online builder forums. We’ve made all the mistakes, and even made up a few new ones! Hopefully, you wont have to do that. With the right information at your fingertips you might even have some fine with your do it yourself pergola adventure.